Ltd. Jiangsu Hurt energy saving

 Heat Pipe and Vacuum Tube

Heat Pipe and Vacuum Tube

Feature:
A perfect combination of the vacuum tube and the heat pipe.
1).Higher heat efficiency: advanced heat transferring style of the heat pipe,excellent selective absorb coating and perfect combination with high vacuum heat preservation.
2).Wide applicable range: as the heat pipe has less heat capacity, it can be started quickly even under cloudy fine day and collect heat effectively. It can work normally even-30 below degree. As no water in the vacuum tube, it can effectively prevent lowing of heat efficiency due to frost cracking or scaling.
3).Each individual tube can work independently,and the whole maching can still work if individual tube is damaged. The service life of the heat pipe can be longer than 15 years.
4). The unique connection between the heat pipe and the vacuum tube can ensure both sealing and replace of damaged glass vacuum tube.

 

 

 Working principe
   The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. the liquid in the heat pipe changes into vapour which rises to the condenser.

   The heat then passes through the heat exchanger and the vapour becomes liquid,returning to the base of the heat pipe.

   The heat conducts to the theat transfer liquid (anti-freezing liquid or water) via a copper pipe.This transference of heat into the luquid creates a continuous circulation as long as the collector is heated by the sun.

 

 

 

 

 

   Vacuum tubes assimilate the advanced 12 layers of spattering deposition of trivalent element technology, high borosilicate glass, gradual change of SS-C/CU selective complex absorptive coating. And these make vacuum tubes have high performance of absorptance and low reflection ratio. Through the interlayer, vacuum has a unique effect of thermo, with its temperature up to 380℃ without of water, performing a strong heating ability.

 

 

Three-targer all-glass vacuum heat collection tube property and specification

Structure

All-glass double-tube co-axial structure

Glass material

High borosilicate 3.3 glass

External pipe diameter and thickness

Φ=47±0.7mm &=1.6mm Φ=58±0.7mm &=1.6mm Φ=70±0.7mm &=2.0mm

Internal pipe siameter and thickness

Φ=37±0.7mm &=1.6mm Φ=47±0.7mm &=1.6mm Φ=58±0.7mm &=1.6mm

Pipe length

1200mm 1500mm 1600mm 1700mm 1800mm 2000mm 2100mm

Absorptive coating property

structure

Cu/SS-ALN(H)/SS-ALN(L)/ALN

Sediment method

3target magnertron sputtering plating

Specific absorption

α=0.93-0.96(AM1.5)

EMISSION RATIO

ε=0.04-0.06(80°C±5°C)

Vacuum tightness

P≤5.0×10-3 (Pa)

Solar irradiation for obtaining a preset water temperature 

H≤4.7MJ/(Φ58)

H≤3.7-4.2MJ/